English
Español
  • Search
  • 0.00 €

    Products 103
    UTC™ GST® Relay Board for GST116A [RB116A]
    UTC™ GST® Relay Board for GST116A
    Ref.: RB116A
    For zonal fault & fire alarm signal output. The relay board for conventional panel, provides additional signal outputs foe zonal fire and fault conditions. In case of fire or fault occurs in any zone, the corresponding relay will be activated, so that the conventional system can be integrated to 3rd party system. Output mode: normally open dry contact. Output capacity: 3A/24VDC/125VAC. WEEE & RoHS compliant. Standards: CE / CPD / EN54-2 / EN54-4. Certifications: LPCB. BS5839-1 compliant.
    V.A.T. included
    345.54 €
    UTC™ GST® Remote Indicator [C-9314P]
    UTC™ GST® Remote Indicator
    Ref.: C-9314P
    The C-9314P Remote Indicator is used to display an alarm from a detector. Suitable applications include when a detector is installed inside a room, false ceiling or an under floor cable space. When the detector issues an alarm, the LED on the lamp will light indicating where the detector was triggered.
    V.A.T. included
    16.25 €
    UTC™ GST® RS232/RS485 to TCP/IP Converter [NPORT5230]
    UTC™ GST® RS232/RS485 to TCP/IP Converter
    Ref.: NPORT5230
    RS232/RS485 to TCP/IP Converter
    V.A.T. included
    1,045.15 €
    UTC™ GST® RS485 Class A Network Card [P-9940A]
    UTC™ GST® RS485 Class A Network Card
    Ref.: P-9940A
    RS485 Network Card for GST200 Series, max 1500m, CLASS A. Powered by GST200-2 main board. Communication: 20 pin Ribbon cable connect to GST200-2 main board XS2 port. Networking interface with all GST intelligent FACP RS485 Class A network.
    V.A.T. included
    334.13 €
    UTC™ GST® Short Circuit Loop Isolator [C-9503E]
    UTC™ GST® Short Circuit Loop Isolator
    Ref.: C-9503E
    In the event of short circuit on the detector loop the C-9503 Isolators either side of the loop will defect the problem and open circuit and isolates the faulty part of the loop, enabling other devises on the unaffected part of the loop to operate normally. The module will continue to monitor for the fault to be repaired, once the fault is cleared the isolator will automatically reinstate the effected part of the loop.
    V.A.T. included
    Consult
    UTC™ GST® Standard Base [DB-01D]
    UTC™ GST® Standard Base
    Ref.: DB-01D
    DB-01 Base is used to mount digital and innovation conventional smoke, heat and combination detectors as their conductive base. It’s made of flame-resistant plastic ABS. It features attractive appearance, novel structure and stable performance. Its flame class is V-0. During installation, you can easily fix the base before connecting cables, and then twist the detector onto the base.
    V.A.T. included
    15.55 €
    UTC™ GST® Weatherproof Box [D-92WPB]
    UTC™ GST® Weatherproof Box
    Ref.: D-92WPB
    Designed to protect manual call point from an accidental operation, outdoor solution and suitable for 92 MCP series. The D-92WPB constructed of high plastic quality with a modern pleasing appearance. Protection Rating: IP65. Cover seal: High performance EPDM gasket.
    V.A.T. included
    156.78 €
    SYSAWAY© 2024 All rights reserved